This content can't be printed from the browser. Use Export PDF with Pro for an offline copy.
A chest protector used during martial arts covers the sternum and ribs. Which skeletal component does it cover, and what is the primary function of these bones?
Axial skeleton; movement of the limbs
Axial skeleton; protection of internal organs
Appendicular skeleton; movement of the limbs
Appendicular skeleton; protection of internal organs
A volleyball player raises one arm vertically overhead. Which term describes the elbow's position relative to the wrist, both before and after raising the arm?
Superior
Distal
Inferior
Proximal
The figure shows an athlete turning the forearm during a warm-up while keeping the upper arm still and the wrist straight.
Which movement takes the forearm from position X to position Y?
Supination
Pronation
Flexion
Extension
A coach uses a skeletal model to discuss support and movement with a group of climbers. Which statements correctly classify the bones?
I. The vertebral column belongs to the axial skeleton.
II. The scapula belongs to the appendicular skeleton.
III. The sacrum belongs to the appendicular skeleton.
I and II only
I and III only
II and III only
I, II and III
Build a Practice Exam — Sports Science HL
Test your knowledge with a custom paper containing questions from selected topics.


During a standing exercise, an athlete lowers a straight leg from a position raised sideways back towards the body's midline, without turning the pelvis. Which plane and axis describe this hip movement? Options give plane / axis, in that order.
Sagittal / frontal
Frontal / longitudinal
Frontal / sagittal
Transverse / longitudinal
During a swimming warm-up, an athlete keeps the elbow straight and moves the hand through a large circle while the shoulder joint remains in approximately the same location. Which description best identifies the movement?
Rotation, with the arm turning about its own longitudinal axis
Abduction, with the arm moving away from the body's midline
Horizontal flexion, with the arm moving across the chest
Circumduction, with the distal end of the arm tracing a circle
An athlete starts with both arms straight in front at shoulder height. Keeping the trunk still and the arms at the same height, the athlete opens the arms out to the sides. Which movement occurs at the shoulders?
Horizontal extension
Horizontal flexion
Elevation
Circumduction
A manufacturer sets the seat-adjustment range of an exercise bicycle using only the mean standing height of its intended users. Testing shows that users of the same height require different seat positions. Which change most directly addresses this limitation?
Use mean standing height from a larger sample to set one fixed seat position.
Use the range of body masses to determine the seat-adjustment range.
Use the distribution of leg lengths to determine the seat-adjustment range.
Use the distribution of shoulder widths to determine the seat-adjustment range.
Build a Practice Exam — Sports Science HL
Test your knowledge with a custom paper containing questions from selected topics.


A manufacturer uses hand measurements from its intended users to produce several sizes of a racket handle. Players test their best-fitting size and the original handle in otherwise identical rackets. Which finding most directly supports the claim that the new design improves efficiency during performance?
Players prefer the appearance of the fitted handle while reporting the same effort.
Players maintain the same shot accuracy with less gripping effort using the fitted handle.
Players produce less accurate shots with less gripping effort using the fitted handle.
Players maintain the same shot accuracy with more frequent grip adjustments using the fitted handle.
A sports science centre investigated whether an anatomical reference card helped athletes position markers for movement screening. The card identified skeletal landmarks and used anatomical positional terminology.
Completion time for marker placement with and without the anatomical reference card.
| Condition | Completion time / s |
|---|---|
| Without reference card | 150 |
| With reference card | 120 |
One athlete positioned a set of markers without the card and then repeated the task using the card. The number and anatomical locations of the markers were identical. Each trial ended when an assessor confirmed that every marker was correctly positioned. Table 1 shows the results. Calculate the percentage reduction in completion time when the card was used.
Explain two reasons for keeping the number and anatomical locations of the markers identical.
Explain two weaknesses of using this athlete's two trials to conclude that the card reduces completion time for athletes.
The centre also examined its annual records for the fastest fully correct completion of the same marker-placement task. The card became available at the start of 2022. Figure 1 shows the records and a straight line of best fit. Using Figure 1, discuss the hypothesis that introducing the card caused the improvement in completion times.
Evaluate the suitability of the straight line of best fit in Figure 1.
In a second study, 24 athletes positioned markers at four skeletal landmarks, both with and without the card. Condition order was randomized. Each athlete was photographed from the front and back in anatomical position. An assessor classified each marker as correctly or incorrectly positioned. Discuss the reliability of this photographic classification.
Figure 2 shows the number of athletes correctly positioning each marker. Analyse the results.
Outline how an expectation effect could contribute to the results of the second study.
Suggest two ways to reduce bias in the photographic assessment.
Sixteen trainee fitness instructors classified shoulder movements from recordings of an athlete's warm-up. They viewed each recording either from one fixed camera or from two synchronized cameras positioned at right angles. The correct classifications had been agreed by a panel of experienced movement analysts.
Table 1. Mean number of correct movement classifications out of 10 recordings (SD), trainee fitness instructors.
| Shoulder movement | One camera: mean (SD) / 10 | Two cameras: mean (SD) / 10 |
|---|---|---|
| Flexion | 8.0 (1.1) | 9.0 (0.8) |
| Abduction | 7.0 (1.3) | 9.0 (0.9) |
| Circumduction | 5.0 (1.5) | 8.0 (1.2) |
Table 1 shows the mean number of correct classifications for each movement, from ten recordings per movement. Calculate the percentage increase in correct classifications of circumduction when two camera views were used instead of one.
Interpret the effect of camera condition on classification accuracy in Table 1.
Figure 1 shows selected positions during one complete shoulder circumduction. Explain two features of the movement that distinguish circumduction from rotation of the upper arm about its own longitudinal axis.
An instructor claims that the complete movement in Figure 1 can be described using one plane and one fixed axis. Discuss this claim.
Half of the instructors viewed the one-camera recordings first; the other half viewed the two-camera recordings first. Explain how this design feature improves the comparison between camera conditions.
All instructors used the same written definitions of the movements, but each recording was classified only once by each instructor. Evaluate the reliability of this classification method.
A fencing coach records a fencer during a warm-up and a forward lunge. Figure 1 shows the shoulder warm-up and three stages of the lunge.
The shoulder warm-up in Figure 1 involves circumduction. Identify one movement that contributes to circumduction.
Use section 8 in the data booklet. Identify the principal plane and perpendicular axis of the lead knee movement during the forward lunge in Figure 1.
Explain why shoulder circumduction cannot be fully described as movement in one plane about one fixed axis.
The coach assesses the fencer's movements using only a side-view video recording. Evaluate this method for identifying anatomical movements during the lunge.
With the elbow bent and the forearm horizontal, the fencer turns the weapon hand palm-down and then palm-up. Describe these two forearm movements.
Outline the sequence of lead-knee and lead-ankle movements shown in Figure 1, from the forward reach to landing.
The coach adapts the drill so that the fencer must step sideways, turn the trunk towards a new target and then lower the body. Explain one anatomical movement that would achieve each of these three adaptations.
Build a Practice Exam — Sports Science HL
Test your knowledge with a custom paper containing questions from selected topics.


A climbing club uses a cable machine for upper-body training. An equipment manufacturer investigates the relationship between climbers' hand length and their preferred handle circumference. Each climber tries several handles during the same exercise before selecting a preferred size. Figure 1 shows the results.
During the pulling phase, a climber keeps the upper arm stationary beside the trunk and brings the hand towards the shoulder, with the palm facing upwards throughout. State the movement at the elbow, its plane and its axis of rotation.
Outline a primary function of each skeletal division, using a named bone from each division to illustrate your answer.
Explain how the manufacturer could use the relationship in Figure 1 to design handles that improve climbers' efficiency during the exercise.
Using anatomical position as the reference, describe the position of the radius relative to the ulna, the carpus relative to the elbow and the humerus relative to the radius. Use section 7 in the data booklet.
The manufacturer's anthropometric database contains measurements from adult members of this climbing club only. The handles will also be sold to adolescent climbers in other regions. Suggest two improvements to the database to support the sizing of these handles.
Discuss the manufacturer's proposal to produce a single handle size based on the mean hand length in its database.
A paddle manufacturer used an anthropometric database of hand dimensions to develop a range of kayak paddle grips. Grip circumference could be selected to fit the paddler, while paddle length, blade shape and total mass remained unchanged. The manufacturer claimed that the ergonomic grips would improve performance efficiency.
Penalty-free slalom completion times for one kayaker using two paddle-grip conditions.
| Grip condition | Completion time / s |
|---|---|
| Standard grip | 100.0 |
| Anthropometrically fitted grip | 96.0 |
One kayaker completed a marked slalom course using a standard grip and, on the next day, a grip selected using their hand dimensions. Both runs were completed without penalties. Table 1 shows the completion times. Calculate the percentage reduction in completion time with the fitted grip.
Explain two reasons for using the same marked course for both runs.
Explain two weaknesses of using these runs to conclude that anthropometrically fitted grips improve paddling performance.
A kayaking club introduced the fitted grips at the start of 2022. Figure 1 shows the club's annual penalty-free course record and a straight line of best fit. The course layout was unchanged throughout. Using Figure 1, discuss the hypothesis that the fitted grips caused the improvement in course records.
Evaluate the suitability of the line of best fit for interpreting the effect of introducing fitted grips.
In a second study, 30 kayakers completed the course with both grip types in randomized order under stable conditions. Grip selection used hand breadth measured with sliding calipers. Hand posture and measurement landmarks were standardized, and each measurement was repeated three times. Discuss the reliability of this anthropometric measurement.
Figure 2 compares each kayaker's completion times with the two grips. Analyse the results in relation to the manufacturer's claim.
Before testing, the kayakers were told that individually fitted grips should improve performance. Outline how this could produce an expectation effect.
Suggest two ways to reduce researcher bias when collecting completion times in the second study.