Clastify logo
Subjects
Features
Review
HOT Save 10%
Tutoring
Log in

B.1.4: Levers in movement and sport

Master IB Sports Science B.1.4: Levers in movement and sport with notes created by examiners and strictly aligned with the syllabus.

This content can't be printed from the browser. Use Export PDF with Pro for an offline copy.

IB Syllabus Requirements for Levers in movement and sport

B.1.4.1

Lever classes and their roles in movement

B.1.4.1

LEVER CLASSES AND THEIR ROLES IN MOVEMENT

What makes a lever?

A lever is a rigid structure that rotates around a pivot when a force acts on it. Bones serve as levers in the body, with joints providing the pivots. Muscles supply the force to move body segments or external objects.

Every lever system has three components:

  • Effort: the force applied to move the lever, such as a muscle pulling on a bone.
  • Fulcrum: the pivot about which the lever rotates.
  • Load: the resistance the effort must overcome, including the weight of a body segment or an object being moved.

To identify a lever's class, look at which component sits between the other two. Whether the lever is horizontal, vertical or tilted makes no difference.

The three classes

Section 12 of the SEHS data booklet shows the three arrangements. A first-class lever has the fulcrum between effort and load. For a second-class lever, the load sits between effort and fulcrum; in a third-class lever, the effort sits between fulcrum and load. The figure compares these arrangements. Reversing one from left to right doesn't change its class.

Levers within the body

These three arrangements also occur in the musculoskeletal system. Here are simplified models of elbow extension, a heel raise and elbow flexion. Each identifies the effort, fulcrum and load.

First class: elbow extension. As an athlete straightens the elbow against resistance at the hand, the elbow joint acts as the fulcrum. The triceps brachii applies effort to the ulna, on the opposite side of the fulcrum from the load. This arrangement helps straighten the arm in a pushing action.

Second class: a heel raise. The forefoot stays on the ground, and the ball of the foot acts as the fulcrum. Body weight transmitted through the ankle provides the load. It lies between the fulcrum and the effort applied at the heel through the Achilles tendon, allowing the calf muscles to raise the body with a force advantage.

Third class: elbow flexion. When an athlete lifts a training weight, the elbow joint acts as the fulcrum. The biceps brachii applies effort to the radius between the elbow and the load at the hand. This requires a relatively large muscle force. In return, a small movement at the muscle's attachment produces a larger movement of the hand.

Mechanical advantage and disadvantage

The effort arm is the perpendicular distance from the fulcrum to the effort's line of action. For the load arm, measure the perpendicular distance from the fulcrum to the load's line of action. These distances determine leverage—not the overall length of the bone or implement.

The ideal mechanical advantage compares the two arms:

MA=dEdLMA = \frac{d_E}{d_L}

Section 12 supplies the lever-class diagrams but does not print this equation.

  • If MA>1MA > 1, the effort arm is longer, giving a force advantage: a smaller effort can balance a larger load.
  • If MA<1MA < 1, the effort arm is shorter, giving a force disadvantage: the required effort is larger than the load.
  • If MA=1MA = 1, the arms are equal, with no force advantage or disadvantage.

For a first-class lever, the fulcrum's position determines whether there is a force advantage, a force disadvantage or equal arms. In the simple arrangements shown in section 12, second-class levers provide a force advantage. Third-class levers operate at a force disadvantage.

Worked example: a simplified elbow-flexion model has an effort arm of 0.040 m0.040\ \text{m} and a load arm of 0.320 m0.320\ \text{m}.

MA=0.0400.320=0.125MA = \frac{0.040}{0.320} = 0.125

Because the value is below one, the lever has a mechanical disadvantage for force. The benefit comes in movement: for the same rotation, the hand travels farther and faster than the muscle attachment. A force disadvantage can therefore be useful when speed and range of movement matter.

Projecting objects and using implements

Internal levers can accelerate an external object before release—for example, when a player throws a ball. A body segment can serve as the striking implement too. During a kick, the leg and foot transfer movement to a ball.

External levers extend what the body can do. An oar can be modelled as a first-class lever. The rower's hands apply effort at the handle, while the oarlock provides the fulcrum. Water resistance at the blade is the load. Through this arrangement, the rower uses muscular effort to move the boat.

A two-handed hockey-stick action can be simplified as a third-class lever. In this model, the upper hand acts as the fulcrum and the lower hand applies effort along the shaft, with resistance at the blade providing the load. The figure identifies this arrangement.

An implement can increase reach and the distance travelled by its striking end. If the same angular movement takes the same time, a longer lever gives its end a greater speed. But increasing the load arm also increases the effort needed to overcome a given resistance. A longer implement isn't automatically better: its useful reach and speed must be weighed against the athlete's ability to move and control it.

Key terms: effort, fulcrum, load, first-class lever, second-class lever, third-class lever, mechanical advantage, mechanical disadvantage, implement.

Were those notes helpful?

B.1.3 Muscular function

B.2.1 Newton’s laws of motion