Clastify logo
Subjects
Features
Review
HOT Save 10%
Tutoring
Log in

B.1.1: Anatomical position, planes and movement

Master IB Sports Science B.1.1: Anatomical position, planes and movement with notes created by examiners and strictly aligned with the syllabus.

This content can't be printed from the browser. Use Export PDF with Pro for an offline copy.

IB Syllabus Requirements for Anatomical position, planes and movement

B.1.1.1

Skeletal divisions and anatomical position

B.1.1.2

Planes, axes and movement terminology

B.1.1.3

Anthropometry and ergonomic equipment design

HL

B.1.1.1

SKELETAL DIVISIONS AND ANATOMICAL POSITION

Anatomical position: a common reference

In Anatomical position, a person stands upright and faces forwards, with arms beside the body, palms facing forwards and feet pointing forwards. Use this reference position for anatomical descriptions even when an athlete is moving or lying down.

Left and right always mean the person's own left and right—not the observer's. This keeps descriptions of movements or injuries consistent.

Two components with different primary functions

The axial skeleton forms the body's central framework and includes the skull, vertebral column, ribs and sternum. It mainly provides support and protection. The skull protects the brain; the vertebral column protects the spinal cord. Around the chest, the ribs and sternum help protect the heart and lungs.

Movement is the main role of the appendicular skeleton, which consists of the upper and lower limbs and the girdles that attach them to the axial skeleton. Limb bones provide attachment sites and act as levers when muscles pull on them. Think of a skater: the lower limbs move the skater across the ice while the central skeleton supports the trunk.

Use section 7, Skeletal system, in the SEHS data booklet to locate the bones below. Notice the distinction at the pelvis: the sacrum and coccyx are axial, whereas the pelvic bones belong to the appendicular skeleton.

Reading the booklet's skeletal diagram

Work down the skeleton from the head towards the feet:

  • Head: the skull surrounds the brain, while the mandible forms the lower jaw. Both belong to the axial skeleton.
  • Chest and spine: each rib curves around the chest; the sternum lies at the front. The vertebrae form the vertebral column, which continues into the sacrum and coccyx.
  • Shoulder girdle: across the upper chest lies the clavicle, with the scapula behind it. These attach the upper limb to the central framework.
  • Upper limb: the upper arm contains the humerus; the forearm contains the radius and ulna. In anatomical position, the radius is on the thumb side and the ulna on the little-finger side. The carpus is the wrist region. A metacarpal lies in the palm, and the phalanges form the fingers.
  • Pelvic girdle: the pelvic bones comprise the ilium, pubis and ischium. They connect the lower limbs to the central framework.
  • Lower limb: the femur lies in the thigh, with the patella at the front of the knee. Of the lower-leg bones, the tibia is larger and medial; the fibula is lateral. A tarsal lies in the ankle or rear-foot region. Farther forwards in the foot lies a metatarsal, while the phalanges form the toes.

The booklet also identifies the spinal regions. In the neck are the cervical vertebrae C1–C7; through the chest region are the thoracic vertebrae T1–T12. The lumbar vertebrae L1–L5 occupy the lower back. Below these lie the sacrum S1–S5, whose vertebrae are fused, and the coccyx.

Describing relative position

Use positional terms to compare one structure with another. In the figure, the directional arrows take anatomical position as their reference.
TermMeaningAnatomical example
SuperiorTowards the head or above another structureThe sternum is superior to the pubis.
InferiorTowards the feet or below another structureThe patella is inferior to the pelvis.
ProximalNearer the limb's attachment to the trunkThe elbow is proximal to the wrist.
DistalFarther from the limb's attachment to the trunkThe fingers are distal to the elbow.
AnteriorTowards the front of the bodyThe sternum is anterior to the thoracic vertebrae.
PosteriorTowards the back of the bodyThe scapula is posterior to the ribs.
MedialNearer the body's midlineThe tibia is medial to the fibula.
LateralFarther from the body's midlineThe radius is lateral to the ulna in anatomical position.
IntermediateBetween two structuresThe sternum is intermediate between the ribs on either side of the chest.

For a sportsperson, these terms allow precise descriptions: discomfort on the lateral side of the knee differs from discomfort on its medial side. Proximal and distal are especially useful for limbs. Their meaning stays clear even when the limb changes position.

Key terms: anatomical position, axial skeleton, appendicular skeleton, superior, inferior, proximal, distal, anterior, posterior, medial, lateral, intermediate.

B.1.1.2

PLANES, AXES AND MOVEMENT TERMINOLOGY

A plane describes where; an axis describes what a rotation turns about

A plane is an imaginary flat surface through the body that we use to describe movement. An axis is an imaginary line about which a body or body segment rotates.

When movement is described in one plane, its axis of rotation lies perpendicular to that plane. Follow the three plane–axis pairings in the figure using section 8, Anatomical planes and axes, in the SEHS data booklet.
PlaneHow it divides the bodyPerpendicular axisSporting application
Sagittal planeLeft and right portionsFrontal axis, running from side to sideKnee flexion and extension during a cycling pedal stroke
Frontal (coronal) planeFront and back portionsSagittal axis, running from front to backHip abduction during a sideways leg raise
Transverse planeUpper and lower portionsLongitudinal axis, running from head towards feetTrunk rotation during a discus throw

A plane and its perpendicular axis have different names. A forward somersault, for example, takes place in the sagittal plane about a frontal axis.

Complex sporting actions involve more than one plane and axis. In a discus throw, trunk rotation combines with movements of the shoulders, hips and knees. Naming just one plane cannot fully describe the throw.

Bending, straightening and moving sideways

  • Flexion decreases the angle between articulating body segments. As a cyclist's heel moves towards the thigh, the knee flexes.
  • Extension increases that angle. During the downward part of the pedal stroke, the cyclist extends the knee.
  • Abduction moves a limb away from the body's midline. To widen their blocking position, a goalkeeper abducts the arms.
  • Adduction moves a limb towards the body's midline. Bringing the arms back towards the sides after a wide block is shoulder adduction.

Flexion and extension are generally described in the sagittal plane about a frontal axis. For abduction and adduction, the usual description is movement in the frontal plane about a sagittal axis.

Turning and circling

  • Pronation rotates the forearm so that the palm faces backwards from anatomical position, or downwards when the elbow is bent and the forearm is held horizontally. Turning a racket face towards the floor can involve a player pronating the forearm.
  • Supination rotates the forearm in the opposite direction. It brings the palm forwards in anatomical position, or upwards when the forearm is horizontal. An athlete supinates the forearm to receive an object palm-up.
  • Rotation turns a body segment about its own longitudinal axis. As a thrower's chest turns towards the throwing direction, the trunk rotates.
  • Circumduction moves the distal end of a limb in a circle while the proximal end remains relatively fixed. During a warm-up, an athlete makes shoulder circles by combining flexion, abduction, extension and adduction.

Rotation turns a segment about its own axis; circumduction makes its distal end trace a circle. Rather than occurring about one fixed axis, circumduction combines movements in more than one plane.

Moving the shoulder girdle and thumb

  • Protraction moves the shoulder girdle forwards around the rib cage. When reaching forwards with a punch, a boxer protracts the shoulder girdle.
  • Retraction moves the shoulder girdle backwards towards the spine. A climber retracts the shoulder girdle to draw the chest towards a hold.
  • Elevation moves a structure upwards. During a shrug, a weightlifter elevates the shoulder girdle.
  • Depression moves a structure downwards. A gymnast depresses the shoulder girdle while pushing the body upwards between parallel bars.
  • Opposition moves the thumb across the palm towards a fingertip. This helps an athlete wrap the thumb around an implement's handle.
  • Reposition returns the thumb from opposition towards its anatomical position. As the athlete opens the hand and releases that grip, the thumb repositions.

Moving the foot and ankle

  • Inversion turns the sole of the foot medially, towards the body's midline. Deliberately turning the sole inwards is an example of a dancer using inversion.
  • Eversion turns the sole laterally, away from the body's midline. A dancer uses eversion to turn the sole deliberately outwards.
  • Plantarflexion points the foot downwards, away from the shin. During the final push-off from the ground, a jumper plantarflexes the ankle.
  • Dorsiflexion draws the top of the foot towards the shin. A runner dorsiflexes the ankle to lift the toes during the recovery phase of a stride.

Inversion and eversion describe which way the sole turns. Plantarflexion and dorsiflexion describe how the foot moves relative to the shin. These terms aren't interchangeable.

Moving an arm horizontally

Horizontal flexion moves the upper arm forwards and across the chest, starting from a position raised out to the side. Bringing the arms together during a chest-fly exercise uses this movement.

The reverse is Horizontal extension: the upper arm moves horizontally away from the front of the chest. This happens as the arms open during the same exercise.

Both shoulder movements occur in the transverse plane about a longitudinal axis. They describe movement across the body at shoulder level, unlike ordinary flexion and extension, which describe forward-and-back movement in the sagittal plane.

Applying a complete movement description

In a sideways leg raise, abduction occurs at the hip in the frontal plane about a sagittal axis. Lowering the leg towards the starting position changes the action to adduction. The plane–axis pairing stays the same.

Key terms: sagittal plane, frontal (coronal) plane, transverse plane, frontal axis, sagittal axis, longitudinal axis; flexion, extension, abduction, adduction, pronation, supination, protraction, retraction, opposition, reposition, inversion, eversion, elevation, depression, circumduction, rotation, plantarflexion, dorsiflexion, horizontal flexion, horizontal extension.

B.1.1.3

ANTHROPOMETRY AND ERGONOMIC EQUIPMENT DESIGN

HL

Anthropometry is “the measurement of body segments and proportions of the human body”. It describes the dimensions of the body and how the sizes of its different parts relate to one another.

From body measurements to equipment sizes

Manufacturers draw on an anthropometric database, which collects body measurements from a group of people, to decide the dimensions of sporting equipment. These measurements also guide the size ranges and adjustment ranges they offer.

Which measurement matters depends on the equipment. Hand dimensions can guide handle sizing; helmet sizing draws on head dimensions. For an exercise-machine seat, leg length can guide the adjustment range. Overall height alone cannot capture these differences: two athletes of the same height may have different limb proportions.

The figure shows how measurements from intended users lead to equipment that fits them. Offering a range of sizes or making equipment adjustable accommodates variation more effectively than using a single design based only on average body size.

Ergonomic design and performance efficiency

Ergonomic design fits equipment to the user's body and the task being performed. A good fit lets a sportsperson make the intended movement without unnecessary reaching or awkward positioning, and without repeatedly adjusting their grip.

Take the handle of a training implement. If it is too large for the athlete's hand, maintaining a grip can be difficult. A handle that is too small may also require an awkward grip. Providing suitable handle sizes based on hand measurements helps athletes control the implement without unnecessary effort.

An adjustable exercise-machine seat can accommodate different leg lengths. With an appropriate setting, the athlete can use the intended movement pattern instead of changing body position to reach the equipment. Anthropometric information supports efficiency by adapting the equipment to the person, rather than forcing the person to compensate for a poor fit.

Fit in protective equipment

Head dimensions also help manufacturers produce a suitable range of helmet sizes. With correct sizing, a helmet can sit in its intended position and remain secure during movement. Anthropometry guides fit; on its own, it does not establish how well a material absorbs an impact.

Key terms: anthropometry, body segments, proportions, anthropometric databases, ergonomic design, efficiency.

Were those notes helpful?

B.1.2 Structure and function of connective tissues and joints